Water Based Adhesive For Medium Hardwood Woodworking
The two-component jigsaw glue is developed for the characteristics of wood material and the characteristics of large deformation due to absorption and loss of water. It can penetrate into the wood well, and the glue has excellent film formation and strong cohesion, especially it can react with the characteristics of wood fibers. The group forms a good chemical bond, which solves the problem of easy cracking of the wood panel.Solid wood panels are durable and have natural textures. Most of them have the unique fragrance of natural wood, have good moisture absorption and air permeability, are good for human health, and do not cause environmental pollution. They are high-quality panels for making high-end furniture and decorating houses. Some solid wood panels of special materials (such as beech) are also ideal materials for making gunstocks and precision instruments.
In recent years, with the development of the domestic economy, solid wood furniture has become more and more popular among consumers, because solid wood furniture has obvious advantages compared with other materials. In particular, many high-end furniture are made of solid wood, which is strong, durable, environmentally friendly, and environmentally friendly. The wood of birch is light brown to reddish brown, with a shiny surface and a smooth mechanism. Yellow and white with slightly brown, obvious annual rings, pure wood body, slightly heavier and harder, fine structure, high mechanical strength, elasticity, high moisture absorption, dry and easy to crack and warp. It is not very durable under the environment that is prone to decay, and is more used in the form of splints. Birch is usually used for special plywood, flooring, furniture, pulp, interior decoration materials, vehicle and ship equipment, plywood, etc. The furniture is smooth and wear-resistant, with clear patterns. It is now used in the production of structures, parquet and interior frames.
Four-sided flip joint machine
A-shaped joint machine
Fan blade rotating joint machine
It is suitable for high-frequency machines, fully automatic splicing machine technology, and unlimited weather.
High bond strength
The initial adhesion is good, and the bonded material will break 100% in 24 hours.
Easy to paint
The glue that has been mixed with the main solid foams, the glue has passed the active period, and the fluidity can be restored after stirring
Low price over the same period
The cost is lower than most products on the market under the same quality conditions, and the quality of the same grade glue is higher than most products on the market.
Flatness standard: ±0.1mm, moisture content standard: 8%-12%.
The main agent (white) and curing agent (dark brown) are mixed according to the corresponding ratio 100:8 100:10 100:12 100:15
Use a stirrer to repeatedly pick up the colloid 3-5 times, and there is no filamentous brown liquid. The mixed glue should be used up within 30-60 minutes
Gluing should be completed within 1 minute, the glue should be uniform and the end glue should be sufficient.
The glued board should be pressed within 1 minute, and must be pressurized within 3 minutes, the pressing time is 45-120 minutes, and the extra hardwood is 2-4 hours.
Pressure: softwood 500-1000kg/m², hardwood 800-1500kg/m²
The curing temperature is above 20℃, light processing (saw, planing) after 24 hours, and deep processing after 72 hours. Avoid sunlight and rain during this period.
A clean glue applicator can ensure that the glue is not easy to block, otherwise it will affect the amount and uniformity of the glue.